干扰装置对热电偶套管绕流及减阻性能研究Research on influence of interference device on flow around thermowell and drag reduction performance
张永超;丁丽林;赵帅;王坚石;陈庆光;
摘要(Abstract):
针对石油裂解气管路中热电偶套管容易因旋涡脱落及受绕流阻力的影响而发生疲劳损伤的问题,使用LES对热电偶套管绕流进行数值模拟,研究套管不同插入深度对尾流场的影响以及套管安装角和干扰装置对涡脱及套管减阻性能的影响。结果表明:随着套管插入深度的增加,套管受流体冲击逐渐增强且尾流中逐渐有旋涡交替脱落;随着安装角的减小,套管阻力系数和升力系数逐渐降低,但套管所受流体冲击面积逐渐增大,综合考虑选择60°安装角,减阻效果达11.4%;增加干扰装置能大幅降低阻力系数,较基础单管所受阻力系数降低35.1%,旋涡脱落频率显著降低。
关键词(KeyWords): 热电偶套管;干扰装置;阻力系数;升力系数
基金项目(Foundation): 山东省自然科学基金项目(ZR2018MEE036);; 山东科技大学群星计划项目(QX2020M97)
作者(Authors): 张永超;丁丽林;赵帅;王坚石;陈庆光;
DOI: 10.16452/j.cnki.sdkjzk.2022.02.012
参考文献(References):
- [1]陈庆光,贾祥省.热电偶套管流体激振数值分析[J].振动与冲击,2013,32(5):119-121.CHEN Qingguang,JIA Xiangxing.Numerical analysis of fluid excitation on a thermowell[J].Journal of Vibration and Shock,2013,32(5):119-121.
- [2]YOUSEFABAD E K,ASADI S,SAVADKOUHI P,et al.The effect of non-uniform combustion temperature profile on thermal fatigue cracking of an air-cooled gas turbine vane[J].Engineering Failure Analysis,2019,105:766-780.
- [3]ABID D,KTARI A,MELLOULI D,et al.Failure analysis of shot-sleeves used in brass high pressure diecasting process[J].Engineering Failure Analysis,2019,104:177-188.
- [4]刘禹,单颖春,刘献栋,等.高温对汽车灰铸铁制动盘热疲劳裂纹萌生寿命的影响[J].机械工程学报,2019,55(8):97-105.LIU Yu,SHAN Yingchun,LIU Xiandong,et al.Effect of high temperature on thermal fatigue crack initiation life of automotive gray cast iron brake disc[J].Journal of Mechanical Engineering,2019,55(8):97-105.
- [5]李彦明,套管钻井技术在煤矿采空区钻井中的应用[J].煤矿机械,2019,40(3):123-125.LI Yanming.Application of casing-drilling technology in coal mine goaf drilling[J].Coal Mine Machinery,2019,40(3):123-125.
- [6]吕明,宁智,阎凯.可压缩旋转气体中超空化射流的热稳定性[J].力学学报,2018,50(3):561-569.Lü Ming,NING Zhi,YAN Kai.Thermal stability of supercavitation jet in a compressible rotary gas[J].Chinese Journal of Theoretical and Applied Mechanics,2018,50(3):561-569.
- [7]GAO D,CHEN G,HUANG Y W,et al.Flow characteristics of a fixed circular cylinder with an upstream splitter plate:On the plate-length sensitivity[J/OL].Experimental Thermal and Fluid Science,2020.DOI:10.1016/j.exp.thermflusci.2020.110135.
- [8]ISLAM S U,MANZOOR R,YING Z C,et al.Numerical investigation of fluid flow past a square cylinder using upstream,downstream and dual splitter plates[J].Journal of Mechanical Science and Technology,2017,31(2):669-687.
- [9]GRIONI M,ELASKAR S A,MIRASSO A E.A numerical study of the flow interference between two circular cylinders in tandem by scale-adaptive simulation model[J].Journal of Applied Fluid Mechanics,2020,13(1):169-183.
- [10]WELLER H G,TABOR G,JASAK H,et al.A tensorial approach to computational continuum mechanics using object-oriented techniques[J].Computers in Physics,1998,12(6):620-631.
- [11]ZHANG H,YANG J M,XIAO L F,et al.Large-eddy simulation of the flow past both finite and infinite circular cylinders at Re=3900[J].Journal of Hydrodynamics,2015,27(2):195-203.
- [12]王晓聪,桂洪斌,刘洋.三维有限长圆柱绕流数值模拟[J].中国舰船研究,2018,13(2):27-34.WANG Xiaocong,GUI Hongbin,LIU Yang.Numerical simulation of three-dimensional flow around a circular cylinder of finite length[J].Chinese Journal of Ship Research,2018,13(2):27-34.